with two-point connection, angle and straight type, for R 1/2 and G 3/4 connection, with automatic flow limitation

The Multilux 4-Eclipse-Set is connected in 2-pipe systems to radiators with a lower 2-point connection such as bathroom radiators, design radiators, universal radiators or radiators with integrated valves. The valve has a unique integrated flow limiter that eliminates over flows. The required flow rate can be adjusted with one twist directly at the valve. The adjusted flow will not be exceed even if there are load changes in the system, due to other valves closing or during morning start up. The valve controls the flow rate independently from differential pressure. Therefore, complicated calculations to determine settings are not necessary. Centre-to-centre distance of connections 50 mm. The Multilux 4-Eclipse-Set is suitable for installation as angle or straight form. Thermostatic insert and shut-off insert are interchangeable. Therefore the valve is suitable for installation both left and right side of the radiator.

Key features

Integrated flow limiter

Eliminates over flows

Suitable for installation as angle or straight form

for pipe connection to the wall or vertical to the floor

Thermostatic insert and shut-off insert are interchangeable

the valve is suitable for installation both left and right side of the radiator

Sets with white or chrome cover

easy to install

Technical description

Applications area:

2-pipe heating systems

Function:

Control
Flow limitation
Shut-off

Dimensions:

DN 15

Pressure class:

PN 10

Temperature:

Max. working temperature: 120 °C, with cover 90 °C.
Min. working temperature: –10 °C

Flow range:

The flow can be stepless pre-set within the range: 10-150 l/h.
Factory setting: Commissioning

Differential pressure (ΔpV):

Max. differential pressure:
60 kPa (<30 dB(A))
Min. differential pressure:
10 – 100 l/h = 10 kPa
100 – 150 l/h = 15 kPa

Materials:

Valve body: Corrosion resistant Gunmetal.
O-rings: EPDM rubber
Valve disc: EPDM rubber
Return spring: Stainless steel
Valve insert: Brass, PPS (polyphenylsulphide)
Spindle: Niro-steel spindle with double O-ring sealing.
Cover: ABS

Surface treatment:

Valve body gunmetal, fittings are nickel-plated.

Marking:

THE and II+ Designation.
Protection cap orange.

Radiator connection:

Adapters for R1/2 and G3/4, for radiator connections. Tolerance compensation ±1,0 mm with special union nuts and flexible flat seal system for installation free of tension.

Pipe connection:

G3/4 male thread for compression fittings for plastic, copper, precision steel or multi-layer pipe.

Connection to thermostatic head and actuator:

HEIMEIER M30x1.5

Thermostatic head Halo:

Thermostatic head Halo with closed graduation cap and liquidfilled thermostat. High actuating force, minimum hysteresis, optimum closing time. Stable control response even with minor calculated p-band variations (<1 K). Conforming to German EnEV and/or DIN V 4701-10. Setting numbers 8–28. Frost protection. Temperature range 6 °C to 28 °C.

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.