Our website uses cookies to better meet your requirements. Proper configuration of browser options allows you to block or remove cookies but can also cause the site to not function properly or even at all. By continuing to use the site, with no change to your browser settings, you agree to the use of cookies.
Learn about our Privacy Policy for cookies and other similar technologies.

Eclipse HF thermostatic inserts

Eclipse HF suitable for manifolds and adjusts the flow rate in the individual heating circuits directly in l/h. This means hydraulic balancing is achieved in one simple operation. The set flow rate is constantly adapted, i.e. if the rate becomes too high, e.g. due to closing adjacent circuits, Eclipse HF controls the flow automatically to the set value. The control cartridge always ensures a constant flow. This makes Eclipse HF a time and cost-saving solution especially for system commissioning.

产品信息

Thermostatic inserts with automatic flow control for manifolds

Eclipse HF suitable for manifolds and adjusts the flow rate in the individual heating circuits directly in l/h. This means hydraulic balancing is achieved in one simple operation. The set flow rate is constantly adapted, i.e. if the rate becomes too high, e.g. due to closing adjacent circuits, Eclipse HF controls the flow automatically to the set value. The control cartridge always ensures a constant flow. This makes Eclipse HF a time and cost-saving solution especially for system commissioning.

Key features

Integrated flow limiter

Eliminates over flows

Easy adjustment

Just a twist to reach design flow

Wide flow range

For high flexibility

Technical description

Applications:

Heating and cooling systems.

Function:

Control
Flow limitation
Shut-off

Pressure class:

PN 10

Temperature:

Max. working temperature: 90°C
Min. working temperature: -10°C

Flow range:

The flow can be stepless pre-set within the range: 30-300 l/h.
Delivery setting: Commissioning setting
Max. 2,5 m3/h per heating circuit manifold.

Differential pressure (ΔpV):

Max. differential pressure:
60 kPa (<30 dB(A))
Min. differential pressure:
30 – 150 l/h = 17 kPa
150 – 300 l/h = 25 kPa

Materials:

Thermostatic insert: Brass, PPS (polyphenylsulphide)
O-rings: EPDM
Valve disc: EPDM
Spring: Stainless steel
Spindle: Niro-steel spindle with double O-ring seal. The outer O-ring is replaceable under pressure.
Connection fitting: Nickel-plated brass

Connection to thermostatic head and actuator:

HEIMEIER M30x1,5

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.

产品规格

动画

使用此互动式动画来模拟我们创新产品的效果,正如它将在你的暖通空调系统中运行的那样。点击播放按钮即可开始!