Electronic room thermostat with clock for thermal actuators
The Thermostat P room temperature controller is used in connection with the corresponding actuators in the fields of heating, ventilation and air-conditioning technology. For time-dependent individual room temperature control, the Thermostat P is used for e. g. residential and commercial buildings with radiators, floor heating systems, ceiling cooling systems or blower convectors etc..
Key features
Time-dependent room temperature control
Electronic two-point room thermostat with built-in sensor
Pulsewidth modulation output signal (PWM)
Models with analog or digital switch clock
Technical description
The Thermostat P is an electronic two-point room thermostat with built-in sensor and is used in connection with e. g. thermal actuators for time-dependent room temperature control with operating modes "only heating" or "only cooling". With its pulsewidth modulation output signal (PWM), it has an almost constant control behaviour, internally adjustable on two-point output signal.
The model with analog switch clock makes it possible to create a weekly program by positioning the switch tabs. Depending on the program, it switches between two operating modes, (day mode and night mode). The corresponding setting value can be set between 5 °C and 30 °C. An operating mode switch makes it possible to select between day, night or automatic mode. The model has control lamps for the heating, cooling or night mode operating state. With a separate switch clock output, additional room temperature controllers with temperature set-back inputs can be controlled.
The models with digital switch clock are menu-driven via four buttons. The display shows the current room temperature, time and operating modes.
The internal real-time clock is equipped with an automatic daylight saving. Time programs with weekly or daily program. Three time programs are preset and changeable. The temperature is adjustable between 7 ° C and 32 ° C. The temperature is achieved due to the self-learning heating curve at the selected time. Models with 230 V operation, with potential-free changeover contact.
The Thermostat P is designed for installation on the wall or on recessed (concealed) switch boxes.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.