Naša spletna stran uporablja piškotke, da bi bolje ustrezala vašim zahtevam. Pravilna konfiguracija možnosti brskalnika omogoča blokiranje ali brisanje piškotkov, lahko pa tudi povzroči, da spletna stran ne deluje pravilno ali sploh ne deluje. Z nadaljnjo uporabo te spletne strani, brez spreminjanja nastavitev brskalnika, se strinjate z uporabo piškotkov.

Več o naši politiki zasebnosti in piškotkih.

TA-MATIC

Thermostatic mixing valve for control of domestic hot water systems with or without hot water circulation.

Informacije o izdelku

Thermostatic mixing valve for domestic hot water

Thermostatic mixing valve for control of domestic hot water systems with or without hot water circulation.

Technical description

Application:

Blending of domestic hot water systems in private houses, blocks of flats, hospitals, nursing homes, hotels, shower-rooms of sports facilities, industrial and commercial buildings.

Function:

The TA-MATIC is intended mainly as a central mixing unit for domestic hot water systems in apartment buildings, in systems with or without hot water circulation.
Most efficient operation is achieved, if the system is equipped with a circulation pump. In this case, the unit can also be used as a central mixer for shower and bath facilities.

Dimensions:

DN 20-50

Pressure class:

PN 10

Working pressure:

Max. dynamic pressure: 500 kPa
Max. inlet pressure ratio (H/C or C/H): 2:1

Temperature:

Max. working temperature: 90°C
Min. ∆t between inlets and outlet: 10°C

Temperature range:

Temperature can be adjusted between 35-65°C
Factory temperature setting: 55°C

Sensibility:

±2°C

Material:

Valve body: Brass CC770S
Inner parts: Brass CW625N, UNI EN 12164
Springs: Stainless steel
Internal seals: EPDM (Perox)
Expansion medium in the thermostat sensing element are gaseous hydrocarbon, wax and pulverized copper.
Connections:
DN 20-40 brass CW625N, UNI EN 12164
DN 50 brass CW625N, UNI EN 12165

Marking:

IMI TA, TA-MATIC, PN, DN, CR, C - H - MIX.

Pipe connection:

Female threaded couplings.
Threads according to ISO 228.

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.

Artikli

Animacije

Uporabite naše interaktivne animacije za simuliranje našega inovativnega izdelka in predstavitev kako deluje v sistemu KGH. Oglejte si filme o naših izdelki in izvedite več o tem, kako vam lahko izdelek pomaga. Za začetek kliknite gumb za predvajanje.

Besedilo za popise