Naša spletna stran uporablja piškotke, da bi bolje ustrezala vašim zahtevam. Pravilna konfiguracija možnosti brskalnika omogoča blokiranje ali brisanje piškotkov, lahko pa tudi povzroči, da spletna stran ne deluje pravilno ali sploh ne deluje. Z nadaljnjo uporabo te spletne strani, brez spreminjanja nastavitev brskalnika, se strinjate z uporabo piškotkov.

Več o naši politiki zasebnosti in piškotkih.

TA-SHUNT

TA-SHUNT is a range of prefabricated control loops which meet most requirements. TA-SHUNT is suitable in heating and cooling systems such as radiator systems, floor heating systems, ventilation heat exchangers and heat re-cycling systems.

Informacije o izdelku

Prefabricated control loop

TA-SHUNT is a range of prefabricated control loops which meet most requirements. TA-SHUNT is suitable in heating and cooling systems such as radiator systems, floor heating systems, ventilation heat exchangers and heat re-cycling systems.

Key features

Δp valve option

Delivers desired differential pressure ensuring accurate balancing and control.

Easy balancing and good compatibility

Primary and secondary circuits return pipes are provided with TA's balancing valves.

Flexibility

Control loop types can be made to customer specification.

Technical description

Applications:

TA-SHUNT is made for the following types of control circuits:

1. Constant flow in primary and secondary circuit.
2. Variable flow in primary circuit and constant flow in secondary circuit.
4. Constant flow in primary and secondary circuit and where the control valve loads the secondary circuit, so-called Norwegian coupling.
5. Water-borne heat recycling with variable flow in the air inlet circuit and constant flow in the outlet air circuit.
7. Variable flow in primary circuit and constant flow in secondary circuit. Stabilization of the differential pressure over a control valve.

TA-SHUNT can be used in systems with up to 50% glycol content.

Pressure class:

PN 6
All components in the prefabricated control loop are classified to at least PN 6. If PN 10 is needed, please specify this when ordering.

Temperature:

Max media temperature: 95°C
Min media temperature: -10°C
Certain pumps require special versions.

Union dimension:

DN 20 - 100

Gate and ball valves:

DN 20-50: Globo H Ball valve
DN 65-100: TA 60 Gate valve

Balancing valves:

DN 10-50: STAD
DN 65-100: STAF
DN 15-100: STAP

Control valves:

2-way: V222, V241.
3-way: V321, V341.

Kvs control valves:

0,25 - 160 in the Renard series.

Pipe packages:

DN 20-50 according to ISO 65 (Carbon steel tubes suitable for screwing in accordance with ISO 7/1).
DN 65-100 pressure vessel pipes, seamless Stainless steel or copper pipe packages can be tendered on request.

Thermometers:

Graduated 0-120°C for heating.
-40°C - +40°C for cooling/recycling.

Insulation:

Heating: Non-combustible mineral wool
Cooling: Armaflex condensate insulation

Protective box:

DN 20-100: Plastic-coated sheet metal box.

Circulation pump:

TA-SHUNT can be equipped with Grundfos, WILO, Flygt etc. pumps as standard.

Non-return valve:

With spring-loaded valve disc.

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.

Artikli

Animacije

Uporabite naše interaktivne animacije za simuliranje našega inovativnega izdelka in predstavitev kako deluje v sistemu KGH. Oglejte si filme o naših izdelki in izvedite več o tem, kako vam lahko izdelek pomaga. Za začetek kliknite gumb za predvajanje.

Besedilo za popise