Our website uses cookies to better meet your requirements. Proper configuration of browser options allows you to block or remove cookies but can also cause the site to not function properly or even at all. By continuing to use the site, with no change to your browser settings, you agree to the use of cookies.
Learn about our Privacy Policy for cookies and other similar technologies.

Dynacon 150

Dynacon 150 adjusts the flow rate in the individual heating circuits directly in l/h. This means hydraulic balancing is achieved in one simple operation. The set flow rate is constantly adapted, i.e. if the rate becomes too high, e.g. due to closing adjacent circuits, Dynacon 150 controls the flow automatically to the set value. The control cartridge always ensures a constant flow. This makes Dynacon 150 heating circuit manifolds a time and cost-saving solution especially for system commissioning.

Informações do Produto

Radiant system manifold for space heating and cooling with automatic flow control. Perfect for low flows in each circuit whilst maintaining a high temperature difference

Dynacon 150 adjusts the flow rate in the individual heating circuits directly in l/h. This means hydraulic balancing is achieved in one simple operation. The set flow rate is constantly adapted, i.e. if the rate becomes too high, e.g. due to closing adjacent circuits, Dynacon 150 controls the flow automatically to the set value. The control cartridge always ensures a constant flow. This makes Dynacon 150 heating circuit manifolds a time and cost-saving solution especially for system commissioning.

Technical description

Application:

Floor heating systems

Function:

Individual room temperature control with actuator or thermostatic head
Flow limitation
Shut-off
Filling
Draining
Flushing
Venting

Pressure class:

PN 6

Flow range:

The flow can be stepless pre-set within the range: 10-170 l/h.
Delivery setting: Commissioning setting.
Max. 2,0 m3/h per heating circuit manifold.

Differential pressure (ΔpV):

Max. differential pressure:
60 kPa, 35 kPa recommended
Min. differential pressure:
10 – 100 l/h = 15 kPa
100 – 170 l/h = 20 kPa

Temperature:

Max. working temperature: 70°C
Min. working temperature: 2°C

Material:

Manifold:
Stainless steel 1.4301
Connection fittings: Nickel-plated brass.

Thermostatic insert:
Brass
O-rings: EPDM
Valve disc: EPDM
Spring: stainless steel
Thermostatic insert: Brass, PPS (polyphenylsulphide)
Spindle: Niro-steel spindle with double O-ring seal.

Flow meter:
Heat-resistant plastic and stainless steel. Brass. EPDM seals.

Filling, draining, flushing and venting device:
Nickel-plated brass and plastic. EPDM seals.

Marking:

IMI Heimeier
Red protection caps.

Connection kits:

The following manifold connection kits are available:
- Connection kit 1 with Globo ball valves
- Connection kit 2 with STAD balancing valve and Globo ball valve
- Connection kit 3 with Zeparo Vent air separator in supply pipe and Zeparo Dirt sludge separator in return
- Connection kit 4 with Globo ball valve, including spacer for heat meter in return and Globo ball valve with connection for direct measurement in supply and return pipe.
- Connection kit 5 fixed value control station with high-efficiency pump for controlling the supply temperature.

Pipe connection:

Manifold with flat-sealing connection, 1" union nut.
Heating circuit connection G3/4 adaptor with Eurocone suitable for compression fittings for plastic, copper, precision steel and multi-layer pipe.
See also accessories.

Manifold boxes:

Manifold boxes available as flush-mounted versions.

Connection to thermostatic head and actuator:

HEIMEIER M30x1,5

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.

Itens

Animações

Use a animação interativa para simular o desempenho de nosso produto inovador em seu sistema hidrônico. Clique em "play" para começar!