With built-in sensor and remote sensor
The thermostatic heads K are used to control the temperature of individual rooms using, for example, heaters, convectors, and radiators. The thermostatic head K range not only provides high-precision control it also is designed for exceptional ease of use. The models with remote sensor enables the installation of the thermostatic head covered by curtains, radiator facings, or other obstructions, or mounted vertically or in tight niches.
Key features
Liquid-filled thermostat with high pressure power and precision control
With 2 clips for marking, limiting or blocking
Symbols for basic setting and nighttime set back
Brief data including the most important settings
Rotation direction indicator
Markings designed for the visually impaired
Technical description
Application:
Heating systems
Functions:
Room temperature control.
Frost protection.
Markings indicate upper and lower temperature range; two energy saving clips can be used to limit settings.
Temperature range is limited on both ends and can be blocked using covered stop clips.
Control behavior:
Proportional controller without auxilliary energy. Liquid-filled thermostat. High pressure power, lowest hysteresis, optimal closing time.
Stable control behavior even in the case of small calculated p-band variation (<1K).
Nominal temperature range:
See each product
Temperature:
Max. sensor temperature: 50°C (122°F)
Specific extension:
0.22 mm/K,
Valve stroke limiter
Control accuracy, CA value:
0.2 K
Water temperature influence:
With built-in sensor: 0.3 K
With remote sensor: 0.3 K
Differential pressure influence:
With built-in sensor: 0.2 K
With remote sensor: 0.3 K
Closing time:
With built-in sensor 19 min
With remote sensor:
Horizontally fitted sensor 12 min
Vertically fitted sensor 15 min
Hysteresis:
With built-in sensor: 0.15 K
With remote sensor: 0.2 K
Material:
ABS, PA6.6GF30, brass, steel,
Liquid-filled thermostat.
Colour:
White RAL 9016
Marking:
Heimeier and KEYMARK symbol.
Setting numbers.
Symbols for basic setting and nighttime reduction.
Brief data including the most important settings.
Setting indicators on the face of the head and markings designed for the visually impaired.
Rotation direction indicator.
Standard:
KEYMARK certified and tested according to EN 215. See also leaflet "Thermostatic Heads - General".
Connection:
Designed to be mounted on all HEIMEIER thermostatic valve bodies and radiators with integrated valves which have an M30x1.5 thermostatic insert.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.