Digitally configurable proportional push actuator for Bus communication with KNX – 160/200 N
Digitally configurable actuators for Bus communication with KNX. A wide range of setup options provide extensive flexibility for on-site parameter adaptation. Fully programmable binary input, relay and adjustable max. stroke of the valve bring new opportunities for advanced hydronic control and balancing.
Key features
Fully configurable
More than 100 setup options allow input and output signals, binary input, relay, characteristics and many other parameters to be configured.
Easy diagnostics
Reports five different types of errors to allow system faults to be found quickly.
Perfection in connectivity
Dedicated versions allow configuring, controlling and communicating via KNX Bus.
Technical description
Functions:
Proportional control
Stroke detection
Self-adjusting force
Mode, status and position indication
Stroke limitation setting
Minimum stroke setting
Valve blockage protection
Valve clogging detection
Error safe position
Diagnostic/Logging
KNX version:
+ 1 binary input, max. 100 Ω, cable max. 10 m or shielded.
KNX R24 version:
+ 1 binary input, max. 100 Ω, cable max. 10 m or shielded.
+ 1 relay, max. 2A, 30 VAC/VDC on resistive load
Supply voltage:
Powered by KNX Bus.
Power consumption:
Typical 216 mW; Maximum 600 mW.
Input signal:
By KNX Bus.
Output signal:
By KNX Bus.
Characteristics:
Linear, EQM 0.25 and inverted EQM 0.25.
Default setting: Linear.
Control speed:
10 s/mm
Adjusting force:
160/200 N
Self-adjusting for IMI Hydronic Engineering valves.
Temperature:
Media temperature: max. 120°C
Operating environment: 0°C – +50°C (5-95%RH, non-condensing)
Storage environment: -20°C – +70°C (5-95%RH, non-condensing)
Ingress protection:
IP54
all directions
(according to EN 60529)
Protection class:
(according to EN 61140)
III (SELV)
Cable:
1, 2 or 5 m.
Halogen free as option, fire class B2ca – s1a, d1, a1 according to EN 50575.
KNX: type J-YY, 2x2x0.6 mm2.
KNX R24: type J-YY, 2x2x0.6 mm2 and relay cable type LiYY, 3x0.34 mm2, with wire end sleeves.
Stroke:
6,9 mm
Automatic detection of the valve lift (stroke detection).
Noise level:
Max. 30 dBA
Weight:
0.20 kg
Connection to valve:
Swivelling nut M30x1,5.
Material:
Cover: PC/ABS GF8
Housing: PA GF40.
Swivelling nut: Nickel-plated brass.
Colour:
White RAL 9016, grey RAL 7047.
Marking:
Label: IMI TA, CE, product name, article No. and technical specification.
Certification CE:
LV-D. 2014/35/EU: EN 60730-1, -2-14.
EMC-D. 2014/30/EU: EN 60730-1, -2-14.
RoHS-D. 2011/65/EU: EN 50581.
Product standard:
EN 60730.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.