Thermostatic mixing valve for domestic hot water
Thermostatic mixing valve for control of domestic hot water systems with or without hot water circulation.
Technical description
Application:
Blending of domestic hot water systems in private houses, blocks of flats, hospitals, nursing homes, hotels, shower-rooms of sports facilities, industrial and commercial buildings.
Function:
The TA-MATIC is intended mainly as a central mixing unit for domestic hot water systems in apartment buildings, in systems with or without hot water circulation.
Most efficient operation is achieved, if the system is equipped with a circulation pump. In this case, the unit can also be used as a central mixer for shower and bath facilities.
Dimensions:
DN 20-50
Pressure class:
PN 10
Working pressure:
Max. dynamic pressure: 500 kPa
Max. inlet pressure ratio (H/C or C/H): 2:1
Temperature:
Max. working temperature: 90°C
Min. ∆t between inlets and outlet: 10°C
Temperature range:
Temperature can be adjusted between 35-65°C
Factory temperature setting: 55°C
Sensibility:
±2°C
Material:
Valve body: Brass CC770S
Inner parts: Brass CW625N, UNI EN 12164
Springs: Stainless steel
Internal seals: EPDM (Perox)
Expansion medium in the thermostat sensing element are gaseous hydrocarbon, wax and pulverized copper.
Connections:
DN 20-40 brass CW625N, UNI EN 12164
DN 50 brass CW625N, UNI EN 12165
Marking:
IMI TA, TA-MATIC, PN, DN, CR, C - H - MIX.
Pipe connection:
Female threaded couplings.
Threads according to ISO 228.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.