Tällä verkkosivustolla käytetään evästeitä parantamaan sivustoa ja paremman selailukokemuksen tarjoamiseksi. Jos valitset "jatka" tai jatkat sivuston selailua valintojasi muokkaamatta, suostut siihen, että käytämme evästeitä. Katso lisää evästekäytännöstämme ja evästeistä kieltäytymisestä klikkaamalla tästä

Important Notes

Dear Customer!

You dispose now of the Thermolux K thermostatic valve which is a product of highest quality made by Germany’s leading manufacturer of heating valves.
The Heimeier Thermolux K thermostatic valves are CEN certified and were tested according to DIN EN 215. They offer you, on the pre-condition of a correct usage, a maximum of comfort and energy saving.
This user information intends to make you acquainted with the operation and useful application of the thermostatic valves. Even if you know already well the operation and handling, you still should read these instructions carefully and please keep this booklet in a safe place and pass it on to any possible later user. For easier reference and orientation please consult the coloured subdivisons of the table of contents.
Should you look for some specific item, please refer to page 15 containing a list of headwords.
The mounting of the thermostatic valve should exclusively be carried out by a qualified installer (please see Mounting Instructions).
Your installer will help you if you wish to block an individual temperature setting or to limit the temperature setting range internally, i.e. unchangeable from outside, either to a higher or to a lower temperature level of your thermostatic valves.
Interesting accessories are offered here.

You dispose now of the Thermolux K thermostatic valve which is a product of highest quality made by Germany’s leading manufacturer of heating valves.

The Thermolux K thermostatic valves are CEN certified and were tested according to DIN EN 215. They offer you, on the pre-condition of a correct usage, a maximum of comfort and energy saving.
This user information intends to make you acquainted with the operation and useful application of the thermostatic valves. Even if you know already well the operation and handling, you still should read these instructions carefully and please keep this booklet in a safe place and pass it on to any possible later user. For easier reference and orientation please consult the coloured subdivisons of the table of contents.

Should you look for some specific item, please refer to page 15 containing a list of headwords.

The mounting of the thermostatic valve should exclusively be carried out by a qualified installer (please see Mounting Instructions).

Your installer will help you if you wish to block an individual temperature setting or to limit the temperature setting range internally, i.e. unchangeable from outside, either to a higher or to a lower temperature level of your thermostatic valves.

Special features

This thermostatic head offers several distinctive features for energy savings and uncomplicated operation:

The most important temperature settings are shown in an abridged form as INFO on the thermostatic head

  • Economy clips, blue and red
  • Reduced night performance 
  • Temperature setting aid on the front side
  • Anti-frost protection setting 

Cleaning

The thermostatic head should only be cleaned with the upholstery brush of a vacuum cleaner or in case of heavier soiling, use lukewarm water containing a mild domestic cleaning agent.

Maintenance and Service

In case of questions or possible disturbances (please see Disturbances - Causes - Remedies) please apply to your installer or contact Heimeier directly.

Easier operation for visually handicapped persons

With a view to achieving an easier temperature setting, the thermostatic head disposes of perceptible markings for the basic setting (please see Temperature Setting).