Este sitio web utiliza cookies para mejorar el sitio y proporcionarle una mejor experiencia de navegación. Si selecciona "continuar" o continúa navegando por el sitio sin personalizar sus opciones, acepta nuestro uso de cookies. Obtenga más información sobre nuestra política de cookies y sobre cómo rechazarlas haciendo clic aquí

Just Push A Button!

And you’ll always have the right room temperature

Programming for heating periods and also for the returning to a set-back phase is carried out via 2 buttons located on the control panel on the top surface of the time adaptor. By pressing the red button, the room temperature will be raised to the normal heating value set on the thermostatic head. However, when the blue button is pressed, the room temperature is once again lowered by as much as 4 degrees Celsius.

These push-button operations are in actual fact the way in which the time adaptor is programmed. Because on all the following days at exactly the same time, E-Pro automatically repeats either the raising or lowering of room temperature as the case might be. It can do this as it has “learnt” the required regulating of room temperature through the push-button process.

It is also easy to know in which mode E-Pro is operating at any one time as this is always shown on the operational status display (Red/Blue) on the control panel.

Heizzeiten Programmieren

The standard set-back time is only cancelled when programming takes place. In order to do this, first of all a period of heating has to be started by pushing a button (for 5 seconds). Then by pushing the button situated beneath the blue dot (also for 5 seconds), the heating time is terminated. Up to 4 heating periods per day can be programmed in this way.