Underfloor heating circuit manifold with flow meter
Dynalux adjusts the flow rate in the individual heating circuits directly in l/min. Hydraulic balancing is achieved in simple operations. This makes Dynalux heating circuit manifolds a time and cost-saving solution especially for system commissioning.
Key features
Hydraulic balancing by direct setting of the flow rate
Manifold made of stainless steel
corrosion-resistant, durable and safe
Thermostatic insert with double O-ring seal
For durable and maintenance free operation
Time and cost-saving commissioning solution
Technical description
Application:
Floor heating systems
Function:
Individual room temperature control with actuator or thermostatic head
Flow adjustment
Shut off
Filling
Draining
Flushing
Venting
Temperature:
Max. working temperature: 60°C
Min. working temperature: -5°C
Flow range:
The flow can be stepless pre-set within the range: 0-5 l/min
Pressure class:
PN 6
Material:
Manifold:
Stainless steel 1.4301
Connection fittings: Nickel-plated brass.
Thermostatic insert:
Brass
O-rings: EPDM
Valve disc: EPDM
Spring: stainless steel
Thermostatic insert: Brass
Spindle: Niro-steel spindle with double O-ring seal. The outer O-ring is replaceable under pressure.
Flow meter:
Heat-resistant plastic and stainless steel. EPDM seals.
Filling, draining, flushing and venting device:
Nickel-plated brass and plastic. EPDM seals.
Connection kits:
The following manifold connection kits are available:
- Connection kit 1 with Globo ball valves
- Connection kit 2 with STAD balancing valve and Globo ball valve
- Connection kit 3 with Zeparo Vent air separator in supply pipe and Zeparo Dirt sludge separator in return
- Connection kit 4 with Globo ball valve, including spacer for heat meter in return and Globo ball valve with connection for direct measurement in supply and return pipe.
- Connection kit 5 fixed value control station with high-efficiency pump for controlling the supply temperature.
Pipe connection:
Manifold with flat-sealing connection, 1" union nut.
Heating circuit connection G3/4 adaptor with Eurocone suitable for compression fittings for plastic, copper, precision steel and multi-layer pipe.
See also accessories.
Manifold boxes:
Manifold boxes available as flush-mounted versions.
Marking:
IMI Heimeier
Connection to thermostatic head and actuator:
HEIMEIER M30x1,5
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.