Our website uses cookies to better meet your requirements. Proper configuration of browser options allows you to block or remove cookies but can also cause the site to not function properly or even at all. By continuing to use the site, with no change to your browser settings, you agree to the use of cookies.
Learn about our Privacy Policy for cookies and other similar technologies.

Multilux Eclipse

Multilux Eclipse is connected in two-pipe systems to radiators with a lower two-point connection such as bathroom radiators, design radiators, universal radiators or radiators with integrated valves. The valve has a unique integrated flow limiter that eliminates over flows. The required flow rate can be adjusted with one twist directly at the valve. The adjusted flow will not be exceed even if there are load changes in the system, due to other valves closing or during morning start up. The valve controls the flow rate independently from differential pressure. Therefore, complicated calculations to determine settings are not necessary. Centre-to-centre distance of connections 50 mm. Thermostatic insert and shut-off insert are interchangeable. Therefore the valve is suitable for installation both left and right side of the radiator.

Informações do Produto

with two-point connection for two-pipe heating systems, with automatic flow limitation

Multilux Eclipse is connected in two-pipe systems to radiators with a lower two-point connection such as bathroom radiators, design radiators, universal radiators or radiators with integrated valves. The valve has a unique integrated flow limiter that eliminates over flows. The required flow rate can be adjusted with one twist directly at the valve. The adjusted flow will not be exceed even if there are load changes in the system, due to other valves closing or during morning start up. The valve controls the flow rate independently from differential pressure. Therefore, complicated calculations to determine settings are not necessary. Centre-to-centre distance of connections 50 mm. Thermostatic insert and shut-off insert are interchangeable. Therefore the valve is suitable for installation both left and right side of the radiator.

Key features

Integrated flow limiter

eliminates over flows

Cover for angle and straight forms, white or chrome

Thermostatic insert and shut-off insert are interchangeable

the valve is suitable for installation both left and right side of the radiator

Easy draining off and filling

Technical description

Applications area:

Two-pipe heating systems

Function:

Control
Flow limitation
Shut-off
Drain-off
Filling

Dimensions:

DN 15

Pressure class:

PN 10

Temperature:

Max. working temperature: 120 °C, with cover 90 °C.
Min. working temperature: –10 °C

Flow range:

The flow can be stepless pre-set within the range: 10-150 l/h.
Delivery setting 150 l/h.

Differential pressure (ΔpV):

Max. differential pressure:
60 kPa (<30 dB(A))
Min. differential pressure:
10 – 100 l/h = 10 kPa
100 – 150 l/h = 15 kPa

Materials:

Valve body: Corrosion resistant Gunmetal.
O-rings: EPDM rubber
Valve disc: EPDM rubber
Return spring: Stainless steel
Valve insert: Brass, PPS (polyphenylsulphide)
The complete thermostatic insert can be replaced using the fitting tool without draining the system.
Spindle: Niro-steel spindle with double O-ring sealing.
Cover: ABS

Surface treatment:

Valve body and fittings are nickel-plated.

Marking:

THE and II+ Designation.
Protection cap orange.

Radiator connection:

Adapters for R1/2 or G3/4, for radiator connections. Tolerance compensation ±1,0 mm with special union nuts and flexible flat seal system for installation free of tension.

Pipe connection:

G3/4 male thread for compression fittings for plastic, copper, precision steel or multi-layer pipe.

Connection to thermostatic head and actuator:

HEIMEIER M30x1.5

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.

Itens

Animações

Use a animação interativa para simular o desempenho de nosso produto inovador em seu sistema hidrônico. Clique em "play" para começar!