Ši interneto svetainė ketinai naudoti slapukus, kad pagerintų tinklalapį ir suteiktų geresnę naršymo patirtį. Jei pasirinksite „Tęsti“ arba toliau naršysite svetainėje, nusprendę nepritaikyti nustatymų, bus laikoma, kad sutinkate naudoti slapukus. Sužinokite daugiau apie mūsų slapukų politiką ir kaip atsisakyti slapukų, paspaudę čia.

TA-MATIC

Thermostatic mixing valve for control of domestic hot water systems in apartment blocks with or without hot water circulation. Perfect for systems with circulation pump.

Produkto informacija

Thermostatic mixing valve for domestic hot water

Thermostatic mixing valve for control of domestic hot water systems in apartment blocks with or without hot water circulation. Perfect for systems with circulation pump.

Key features

Temperature range

The valve is available in four setting ranges 20-30°C and 45-65°C depending on dimension.

Self-acting

No additional energy source needed.

Technical description

Application:

Domestic hot water systems in private houses, blocks of flats, hospitals, old-age and nursing homes, hotels, shower-rooms of sports facilities, industrial and commercial buildings.

Function:

The TA-MATIC is intended mainly as a central mixing unit for domestic hot water systems in apartment buildings, in systems with or without hot water circulation.
It works most efficient, if the system is equipped with a circulation pump. In this case, the unit can also be used as a central mixer for shower and bath facilities.

Dimensions:

DN 20-80

Pressure class:

PN 10

Temperature:

Max. working temperature: 90°C

Temperature range:

Standard temperature settings:
DN 25: 55°C
DN 32: 55°C
DN 40: 55°C
DN 50: 55°C
DN 65: 25°C or 55°C
DN 80: 55°C
Factory-set standard temperatures can be adjusted within the limits:
25°C: 20-30°C
55°C: 45-65°C

Material:

Valve body: Gunmetal CC499K (CuSn5Zn5Pb2-C)
Seat: Stainless steel
Expansion medium in the thermostat sensing element are gaseous hydrocarbon, wax and pulverized copper.

Marking:

DN 20-50: TA-MATIC 3400, JRGUMAT PN10 and dimension (ex. 32 • 1 ¼).
DN 65-80: TA-MATIC 3410, JRGUMAT PN10 and dimension.

Connections:

DN 20-50: Male threads according to ISO 228.
DN 65-80: Flanges according to EN 1092-2.

Packaging:

The packaging of the TA-MATIC can be used to provide insulation against heat losses.

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.

Produktai

Animacija

Pasinaudodami šia interaktyvia animacija galite sumodeliuoti, kaip realiose ŠVOK sistemose veikia mūsų pažangūs produktai. Paspauskite paleidimo mygtuką ir pradėkite!

Text for Tenders