Ši interneto svetainė ketinai naudoti slapukus, kad pagerintų tinklalapį ir suteiktų geresnę naršymo patirtį. Jei pasirinksite „Tęsti“ arba toliau naršysite svetainėje, nusprendę nepritaikyti nustatymų, bus laikoma, kad sutinkate naudoti slapukus. Sužinokite daugiau apie mūsų slapukų politiką ir kaip atsisakyti slapukų, paspaudę čia.

TA 500

Used in heating, cooling and tap water systems, the TA 500 is made of AMETAL®, minimising the risk of leakage and maximising product lifetime.

Produkto informacija

Ball valve – DN 10-50

Used in heating, cooling and tap water systems, the TA 500 is made of AMETAL®, minimising the risk of leakage and maximising product lifetime.

Key features

PTFE coated ball

For optimum manoueverability.

Double PTFE sealings

Minimise the risk of leakage and ensure a trouble-free operation.

AMETAL®

Dezincification resistant alloy that guarantees a longer valve lifetime and lowers the risk of leakage.

Technical description

Applications:

Heating and cooling systems
Tapwater systems
Process systems where the media does not affect the incoming material.

Function:

Shut-off

Dimensions:

DN 10-50

Pressure class:

PN 25 (see below)

Temperature:

Max. working temperature: 185°C
Min. working temperature: -50°C

NOTE! DN 25-50 with smooth ends max working temperature 120°C and min working temperature -20°C irrespective of pressure.

Pressure and temperature limits:

Max. pressure at different temperature;
90°C: threaded 25 bar, with soldering coupling 16 bar.
130°C: 16 bar
160°C: 10 bar
185°C: 5 bar

Material:

Body: AMETAL®
Spindle: AMETAL®
Ball: PTFE coated AMETAL®
Spindle seal springs: Stainless steel
Seal rings: PTFE
Lever (blue): Epoxy painted die-cast aluminium.
Reduction unit: Nickel-plated die-cast zinc alloy and handwheel (blue) of glass fibre re-inforced plastic.


AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.

Surface treatment:

Article No 58 500/58 503: Nickel-plated
The rest of the product range not treated (yellow).

Insulation:

Use valves with a spindle extension or with a reduction unit when using insulation.

Installation:

The lever and the reduction unit can easily be removed if necessary.

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.

Produktai

Animacija

Pasinaudodami šia interaktyvia animacija galite sumodeliuoti, kaip realiose ŠVOK sistemose veikia mūsų pažangūs produktai. Paspauskite paleidimo mygtuką ir pradėkite!

Text for Tenders