Our website uses cookies to better meet your requirements. Proper configuration of browser options allows you to block or remove cookies but can also cause the site to not function properly or even at all. By continuing to use the site, with no change to your browser settings, you agree to the use of cookies.
Learn about our Privacy Policy for cookies and other similar technologies.

TA-MATIC

Thermostatic mixing valve for control of domestic hot water systems in apartment blocks with or without hot water circulation. Perfect for systems with circulation pump.

Informacije o proizvodima

Thermostatic mixing valve for domestic hot water

Thermostatic mixing valve for control of domestic hot water systems in apartment blocks with or without hot water circulation. Perfect for systems with circulation pump.

Key features

Temperature range

The valve is available in four setting ranges 20-30°C and 45-65°C depending on dimension.

Self-acting

No additional energy source needed.

Technical description

Application:

Domestic hot water systems in private houses, blocks of flats, hospitals, old-age and nursing homes, hotels, shower-rooms of sports facilities, industrial and commercial buildings.

Function:

The TA-MATIC is intended mainly as a central mixing unit for domestic hot water systems in apartment buildings, in systems with or without hot water circulation.
It works most efficient, if the system is equipped with a circulation pump. In this case, the unit can also be used as a central mixer for shower and bath facilities.

Dimensions:

DN 20-80

Pressure class:

PN 10

Temperature:

Max. working temperature: 90°C

Temperature range:

Standard temperature settings:
DN 25: 55°C
DN 32: 55°C
DN 40: 55°C
DN 50: 55°C
DN 65: 25°C or 55°C
DN 80: 55°C
Factory-set standard temperatures can be adjusted within the limits:
25°C: 20-30°C
55°C: 45-65°C

Material:

Valve body: Gunmetal CC499K (CuSn5Zn5Pb2-C)
Seat: Stainless steel
Expansion medium in the thermostat sensing element are gaseous hydrocarbon, wax and pulverized copper.

Marking:

DN 20-50: TA-MATIC 3400, JRGUMAT PN10 and dimension (ex. 32 • 1 ¼).
DN 65-80: TA-MATIC 3410, JRGUMAT PN10 and dimension.

Connections:

DN 20-50: Male threads according to ISO 228.
DN 65-80: Flanges according to EN 1092-2.

Packaging:

The packaging of the TA-MATIC can be used to provide insulation against heat losses.

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.

Artikli

Aminacije

Koristite ovu interaktivnu animaciju za simulaciju učinaka naših inovativnih proizvoda u vašem HVAC sustavu. Kliknite na gumb za početak!

Text for Tenders